Nature and mechanisms of relaxation processes in biocompatible polylactide films
Keywords:polylactide, polymer composite, charge-dipole centres, electret state stability, thermal activation spectroscopy, FTIR-spectroscopy, attenuated total reflectance (ATR)
The results of a TSRSP study of the electret properties of initial PLA films and PLA-based composite films with various hydrophilic nanoscale fillers are presented. It is shown that the introduction of a filler into the composite matrix changes the relaxation mechanism and leads to an improvement in the electret state stability in the PLA-based composite samples. The maximum possible value of the electret state stability in PLA-based composite film is provided by the proper electreting mode.
The nature and mechanism of relaxation, as well as the stability of the electret state, is obtained by the presence of charge-dipole centres in the polymer structure. The presence and distribution form of the charge-dipole centres in the polymer matrix of PLA composites was confirmed by FTIR-spectroscopy and the attenuated total reflectance (ATR) method.
Ermolovich, O. A., Makarevich, A. V., Goncharova, E. P., Vlasova, G. M. (2005) Metody otsenki biorazlagaemosti polimernykh materialov [Methods for analyzing of biodegradability of polymeric materials]. Biotekhnologiya — Biotechnology, 4, 47–54. (In Russian)
Fedotova, O. B., Myalenko, D. M., Shalaeva, A. V. (2010) “Aktivnaya upakovka” iz polimernykh materialov [“Active packing” from polymeric materials]. Pishchevaya promyshlennost’ — Food Processing Industry, 1, 22–23. (In Russian)
Fomin, V. A., Guzeev, V. V. (2001) Biorazlagaemye polimery, sostoyanie i perspektivy ispol’zovaniya [Biodegradable polymers, the state and prospects of use]. Plasticheskie massy, 2, 42–46. (In Russian)
Galikhanov, M. F., Borisova, A. N., Deberdeev, R. Ya., Krynitskaya, A. Yu. (2005) Aktivnaya upakovka dlya masla [Active packing for oil]. Pishchevaya promyshlennost’ — Food Processing Industry, 7, 18–19. (In Russian)
Galikhanov, M. F, Guzhova, A. A, Borisova, A. N. (2014) Effect of active packaging material on milk quality. Bulgarian Chemical Communications, 46 (Special Issue B), 142–145. (In English)
Galikhanov, M. F, Zhigaeva, I. A., Minnakhmetova, A. K., Deberdeev, R. Ya. (2008) Izuchenie biorazlagaemosti elektretnykh polimernykh materialov [Biodegradability of electret polymer materials]. Zhurnal prikladnoj khimii — Russian Journal of Applied Chemistry, 81 (7), 1178-1181. (In Russian)
Gorokhovatskiy, Yu. A., Galikhanov, M. F., Ignatyeva, D. A. et al. (2017) Charge relaxation mechanisms in composite films based on polylactide. Humanities and Science University Journal, 27, 46–55. (In English)
Gorokhovatskiy, Yu. A., Chistyakova, O. V., Karulina, E. A. et al. (2019) The detection of charge-dipole centers in composites based on polylactide by attenuated total reflectance method. In: International conference on electrical engineering and photonics (EExPolytech–2019). Saint Petersburg: IEEE Publ., pp. 217–219. https://doi.org/10.1109/EExPolytech.2019.8906796 (In English)
Gorokhovatskiy, Yu. A., Ignatyeva, D. A., Sotova, Yu. I. (2018) Electret effect in сomposite polylactide based films with hydrophilic nanodispersed fillers. In: International conference on electrical engineering and photonics (EExPolytech–2018). Saint Petersburg: IEEE Publ., pp. 192–193. https://doi.org/10.1109/EExPolytech.2018.8564406 (In English)
Ignatyeva, D. A., Gorokhovatskiy, Yu. A., Karulina, E. A. et al. (2015a) Termostimulirovannaya relaksatsiya poverkhnostnogo potentsiala v kompozitnykh plenkakh na osnove polilaktida s nanodispersnym napolnitelem aerosilom [Thermally stimulated relaxation of the surface potential in composite films based on polylactide with nanodispersed aerosil filler]. Vestnik Tekhnologicheskogo universiteta — Bulletin of the Technological University, 18 (18), 61–64. (In Russian)
Ignatyeva, D. A., Karulina, E. A., Chistyakova, O. V. (2015b) Mekhanizm relaksatsii elektretnogo sostoyaniya v plenkakh polilaktida s dispersnym napolnitelem [The mechanism of electret state relaxation in polylactide films containing dispersed filler]. Izvestia Rossijskogo gosudarstvennogo pedagogicheskogo universiteta im. A. I. Gertsena — Izvestia: Herzen University Journal of Humanities & Sciences, 173, 39–45. (In Russian)
Legonkova, O. A. (2006) Eshche raz o biorazlozhenii polimernykh materialov [Once again about the biodegradation of polymer materials]. Tara i upakovka — Package and Packaging Magazine, 2, 57–58. (In Russian)
Pihlajamaki, H., Bostman, O., Tynninen, O., Laitinen, O. (2006) Long-term tissue response to bioabsorbable poly-l-lactide and metallic screws: An experimental study. Bone, 39 (4), 932–937. https://doi.org/10.1016/j.bone.2006.04.009 (In English)
Stein, R. S. (1992) Polymer recycling: opportunities and limitations. Proceedings of the National Academy of Sciences of the United States of America, 89, 835–838. https://doi.org/10.1073/pnas.89.3.835 (In English)
Copyright (c) 2021 Yuriy A. Gorokhovatskiy, Elena A. Karulina, Daria A. Ignatyeva
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The work is provided under the terms of the Public Offer and of Creative Commons public license Attribution-NonCommercial 4.0 International (CC BY-NC 4.0). This license allows an unlimited number of persons to reproduce and share the Licensed Material in all media and formats. Any use of the Licensed Material shall contain an identification of its Creator(s) and must be for non-commercial purposes only.