Research of the protective ability of coatings on steel powder against atmospheric corrosion
DOI:
https://doi.org/10.33910/2687-153X-2024-5-3-111-123Keywords:
additive technologies, laser powder bed fusion, direct metal deposition, metal powder compositions, corrosion protection, chemical heat treatment, iodine transport methodAbstract
Storing the main material for additive technologies, i. e. metal powder compositions made from steels and alloys with low corrosion resistance, is a challenge. We studied the protective ability of coatings applied by chemical heat treatment (CHT) to the surface of a steel powder, which has low resistance against atmospheric corrosion. Long-term two-year tests of powder samples with various coating compositions were carried out at natural atmospheric humidity and ambient temperature in the Northwestern Federal District of the Russian Federation. The chemical composition of the samples was evaluated before and after the test. The chemical composition and morphology of the particles were determined by electron microprobe (EMP) using a scanning electron microscope (SEM). It is shown that coatings applied by the CHT method do not create continuous protection and accelerate corrosion processes in comparison with the heat-treated powder of the initial steel.
References
Bogdanov, S. P. (2011a) Polucheniye pokrytij na poroshkakh metodom jodnogo transporta [Preparation of coatings on powders by iodine transport method]. Fizika i khimiya stekla, 37 (2), 229–237. (In Russian)
Bogdanov, S. P. (2011b) Preparation of coating on powders by the iodine transport method. Glass Physics and Chemistry, 37 (2), 172–178. https://doi.org/10.1134/S1087659611020040 (In English)
Bogdanov, S. P. (2012a) Jodotransportnyj metod polucheniya pokrytij na poroshkakh [Iodine transport method for producing coatings on powders]. Izvestiya Sankt-Peterburgskogo gosudarstvennogo tekhnologicheskogo instituta (Tekhnicheskogo universiteta) — Bulletin of the Saint Petersburg State Institute of Technology (Technical University), 16 (42), 24–28. (In Russian)
Bogdanov, S. P. (2012b) Khimicheskaya aktivnost’ pokrytij, poluchennykh metodom jodotransporta [Chemical activity of coatings obtained by the iodine transport method]. Fizika i khimiya stekla, 38 (6), 750–754. (In Russian)
Bogdanov, S. P. (2016) Poluchenie funktsional’nykh pokrytij metodom jodnogo transporta [Production of functional coatings by the iodine transport method]. In: Innovatsionnyye materialy i tekhnologii v dizajne: Materialy II Vserossijskoj nauchno-tekhnicheskoj konferentsii (s uchastiem molodykh uchenykh) [Innvative materials and technologies in design: Proceedings of the II All-Russian scientific and technical conference (with the participation of young scientists)]. Saint Petersburg: Saint Petersburg State University of Film and Television Publ., pp. 21–27. (In Russian)
Borisenok, G. V., Vasiliev, L. A., Voroshnin, L. G. et al. (1981) Khimiko-termicheskaya obrabotka metallov i splavov: Spravochnik [Chemical-thermal processing of metals and alloys: A reference book]. Moscow: Metallurgy Publ., 424 p. (In Russian)
Khristyuk, N. A., Bogdanov, S. P. (2018) Fazovye prevrashcheniya v khromsoderzhashchikh pokrytiyakh na stalyakh, poluchennykh metodom yodnogo transporta [Phase transformations in chromium-containing coatings on steels obtained by the iodine transport method]. In: Aktual’nye problemy fizicheskogo metallovedeniya stalej i splavov: Materialy XXIV Ural’skoj shkoly metallovedov-termistov [Current problems of physical metal science of steels and alloys: Proceedings of the XXIV Ural school of metalurgists and thermists]. Magnitogorsk: Nosov Magnitogorck State Technical University Publ., pp. 177–179. (In Russian)
Khristyuk, N. A., Bogdanov, S. P., Sychev, M. M. (2015) Sovremennye sposoby polucheniya khromsoderzhashchikh pokrytij na stalyakh gazotransportnymi metodami [Actual methods of preparing of the chromium-containing coatings on steel by means of gas transportation method]. Izvestiya Sankt-Peterburgskogo gosudarstvennogo tekhnologicheskogo instituta (Tekhnicheskogo universiteta) — Bulletin of the Saint Petersburg State Institute of Technology (Technical University), 29 (55), 10–14. (In Russian)
Lakhtin, Yu. M., Arzamasov, B. N. (1985) Khimiko-termicheskaya obrabotka metallov [Chemical and thermal processing of metals]. Moscow: Metallurgiya Publ., 256 p. (In Russian)
Lee, S. B., Cho, K. H., Lee, W. G., Jang, H. (2009) Improved corrosion resistance and interfacial contact resistance of 316L stainless-steel for proton exchange membrane fuel cell bipolar plates by chromizing surface treatment. Journal of Power Sources, 187, 318–323. https://doi.org/10.1016/j.jpowsour.2008.11.064 (In English)
Likhtman, V. I. (1954) Vliyaniye poverkhnostno-aktivnoj sredy na protsessy deformatsii metallov [Effect of surfaceactive environment on metal deformation processes]. Moscow: USSR Academy of Sciences Publ., 208 p. (In Russian)
Lobanov, M. L., Kardonina, N. I., Rossina, N. G., Yurovskikh, A. S. (2014) Zashchitnyye pokrytiya [Protective coatings]. Ekaterinburg: Ural Federal University Publ., 200 p. (In Russian)
Popov, A. A. (1962) Teoreticheskiye osnovy khimiko-termicheskoj obrabotki stali [Theoretical foundations of chemicalthermal processing of steel]. Moscow: Metallurgizdat Publ., 120 p. (In Russian)
Rolsten, R. F. (1968) Jodidnye metally i jodidy metallov [Iodide metals and metal iodides]. Moscow: Metallurgiya Publ., 524 p. (In Russian)
Solntsev, S. S. (2009) Zashchitnye pokrytiya metallov pri nagreve: Sspravochnoye posobiye [Protective coatings of metals during heating: Reference manual]. 2nd ed. Moscow: Librokom Publ., 248 p. (In Russian)
Xiaowei, Y., Gotman, I., Klinger, L., Gutmanas, E. Y. (2005) Formation of titanium carbide on graphite via powder immersion reaction assisted coating. Materials Science and Engineering: A, 396 (1–2), 107–114. https://doi.org/10.1016/j.msea.2005.01.011 (In English)
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Ivan V. Shakirov, Anton S. Zhukov, Vitaliy V. Bobyr’, Pavel A. Kuznetsov
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The work is provided under the terms of the Public Offer and of Creative Commons public license Creative Commons Attribution 4.0 International (CC BY 4.0).
This license permits an unlimited number of users to copy and redistribute the material in any medium or format, and to remix, transform, and build upon the material for any purpose, including commercial use.
This license retains copyright for the authors but allows others to freely distribute, use, and adapt the work, on the mandatory condition that appropriate credit is given. Users must provide a correct link to the original publication in our journal, cite the authors' names, and indicate if any changes were made.
Copyright remains with the authors. The CC BY 4.0 license does not transfer rights to third parties but rather grants users prior permission for use, provided the attribution condition is met. Any use of the work will be governed by the terms of this license.
